Co hledáte?

Zadat hledaný výraz

Litujeme!

Nebyly nalezeny žádné výsledky.

Přihlášení

Jste nový zákazník?

Zaregistrujte se a zajistěte si mnoho výhod:

Kontrola dostupnosti produktu
Rychlá další objednávka & historie objednávek
Osobní doporučení produktu
Platba na fakturu

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
FAQ

HK FI AD 1800 E0 N AF VG

Adsorberfilter Ölnebel bis 1800l-Tank EW

Adsorberfilter Ölnebel bis 1800l-Tank EW

Air volume
260 m³/h
For tank size
800 to 1800 litres 
Oil absorption capacity max.
1.1 l
PDF ke stažení

Zvolte prosím některé provedení

Zobrazit tabulku položek
Podrobnosti o produktu

HK FI AD 1800 E0 N AF VG

Air volume
260 m³/h
For tank size
800 to 1800 litres
Oil absorption capacity max.
1.1 l
Activated carbon fill quantity
3 kg
A
464 mm
B
150 mm
C
154 mm
G
G 1″ -11
Všechny vlastnosti

Vlastnosti

Design
  • Disposable oil mist adsorber, without valves 
  • integrated filter element 3 µm 
Installation position
  • vertical 
Temp. min.
  • -40 °C
Temp. max.
  • 80 °C
Material
  • Housing: PA6, PC, PVC 
  • seal: FKM (FPM) 
Connector
  • BSPP male thread, parallel 
Connection position
  • at bottom 
Customs tariff number
  • 84213925 
Všechny vlastnosti

Popis výrobku

Pokyny
The oil mist adsorber filter must be completely replaced after saturation.
Design basis are medium, tank volume and evaporated oil volume.
Popis
The oil mist adsorber filters of the HK FI AD E0 VG series are disposable oil mist separators without valves.
They are suitable for indoor and outdoor use on hydraulic units, gearboxes, barrels and IBCs.
The plastic housing is filled with activated carbon.
In combination with a splash guard and oil demister, the activated carbon cleans the air flowing out of the system and thus protects the environment from contamination by oil aerosols.
If the adsorber is saturated (discoloration of the white silica gel layer), it is replaced.
Doplňující údaje
The oil mist adsorber filter binds the oil particles contained in the outflowing air.
Larger oil aerosols stick to the metal demister, condense and drip back into the tank. The smaller oil aerosols are bound in the pores of the activated carbon.
The saturation (loading) and the necessary replacement of the filter cartridge is indicated by a colour change of the white layer from colourless to brown.
The adsorber is completely replaced after saturation.
Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge. Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge.
The inner surface is between 300 and 2000 m²/g coal, so the inner surface of four grams of activated carbon corresponds approximately to the area of ​​a soccer field. The density of activated carbon is in the range of 0.2 to 0.6 g/cm³.
Activated carbon binds non-polar substances (substances that cannot be mixed with water) in the internal pores.
Pokyny k objednávání
For mounting on the tank, the KH FI AD FS FILL filling flange is required.

Product variants

3 Results
Zobrazit rozměrový výkres
Označení
Air volume (m³/h)
For tank size
Oil absorption capacity max. (l)
Activated carbon fill quantity (kg)
40 m³/h
100 to 400 litres 
0.32 l
0.9 
Více informací
180 m³/h
400 to 800 litres 
0.8 l
2.2 
Více informací
260 m³/h
800 to 1800 litres 
1.1 l
Více informací
Air volume: recommended air flow for optimal cut-off efficiency

Column selection

Air volume (m³/h)
For tank size
Oil absorption capacity max. (l)
Activated carbon fill quantity (kg)
A (mm)
B (mm)
C (mm)
G
Air volume: recommended air flow for optimal cut-off efficiency