Co hledáte?

Zadat hledaný výraz

Litujeme!

Nebyly nalezeny žádné výsledky.

Přihlášení

Jste nový zákazník?

Zaregistrujte se a zajistěte si mnoho výhod:

Kontrola dostupnosti produktu
Rychlá další objednávka & historie objednávek
Osobní doporučení produktu
Platba na fakturu

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
FAQ

KTF 332

PTFE-Glattschlauch DN032, 3 Umflecht. ST

PTFE-Glattschlauch DN032, 3 Umflecht. ST

Inside Ø
31.9 mm
Outside Ø
39.3 mm
Bend radius min.
280 mm
PDF ke stažení

Zvolte prosím některé provedení

Zobrazit tabulku položek
Podrobnosti o produktu

KTF 332

Inside Ø
31.9 mm
Outside Ø
39.3 mm
Bend radius min.
280 mm
Burst pressure
1,000 bar
Test pressure
375 bar
Weight per m
1.56 kg
Working pressure 20 °C (stat.)
250 bar
Všechny vlastnosti

Vlastnosti

Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Features
  • smooth inner liner 
Hose material
  • PTFE (Polytetrafluoroethylene) 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Všechny vlastnosti

Popis výrobku

Pokyny
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Pokyny k objednávání
Other designs available on request

Product variants

8 Results
Zobrazit rozměrový výkres
Označení
Vnitřní Ø (mm)
Vnější Ø (mm)
Hmotnost na m (kg)
Poloměr ohybu min. (mm)
6,2 mm
11,2 mm
0,262 
60 mm
Více informací
8 mm
13,4 mm
0,345 
85 mm
Více informací
10 mm
15,7 mm
0,442 
110 mm
Více informací
12,2 mm
18,8 mm
0,6 
150 mm
Více informací
15,1 mm
21,6 mm
0,7 
175 mm
Více informací
20,2 mm
27,8 mm
1,055 
200 mm
Více informací
24,2 mm
31,7 mm
1,205 
240 mm
Více informací
31,9 mm
39,3 mm
1,56 
280 mm
Více informací

Column selection

Vnitřní Ø (mm)
Vnější Ø (mm)
Hmotnost na m (kg)
Poloměr ohybu min. (mm)
Provozní tlak 20 °C (stat.) (bar)
Trhací tlak (bar)
Zkušební tlak (bar)