The product image may differ
Inside Ø
12.2 mm
Outside Ø
18.8 mm
Bend radius min.
150 mm
Podrobnosti o produktu
KTF 313
Inside Ø
12.2 mm
Outside Ø
18.8 mm
Bend radius min.
150 mm
Burst pressure
1,800 bar
Test pressure
675 bar
Weight per m
0.6 kg
Working pressure 20 °C (stat.)
450 bar
Všechny vlastnosti
Vlastnosti
Application
- high-pressure applications with different media, 2-component glue and aggressive media
Application
- mainly for the adhesive industry, surface treatment, heater hose systems.
Approval
- The base material has an FDA-approval, EG 1935/2004 and EU 10/2011.
Braiding
- two-braided of steel wire, bronzed, one layer of steel wire galvanised
Design
- smooth inliner in white PTFE
- thick-walled
Features
- smooth inner liner
Hose material
- PTFE (Polytetrafluoroethylene)
Temp.
- applies only to the hose
Temp. max.
- 200 °C
Temp. min.
- -70 °C
Všechny vlastnosti
Popis výrobku
Pokyny
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Pokyny k objednávání
Product variants
8 Results
Search
Zobrazit rozměrový výkres
Označení
Column selection
Vnitřní Ø (mm)
Vnější Ø (mm)
Hmotnost na m (kg)
Poloměr ohybu min. (mm)
Provozní tlak 20 °C (stat.) (bar)
Trhací tlak (bar)
Zkušební tlak (bar)